Category Archives: Scania

Fire Appliances based on Scania Cab-Chassis

WA Fire & Rescue – UP05HR – Scania Urban Pumper Heavy Rescue

Service – Fire & Rescue Service of WA
Appliance type – Urban Pumper
Fleet number – UP05
Cab Chassis – Scania P310
Body Builder –
Registration – 1QBP374

This Urban Pumper replaced an Acco 2350 based Medium Pumper at Bunbury station.

DFES states: “UP Series appliance design is a continuous improvement upgrade to the Heavy Pump appliance series first commissioned in 2008.
The UP series development process incorporates the commissioning by Fleet and Equipment Services of FESA generated drawings and specifications, proto type manufacture under direction, and full scale manufacturing. This process was adapted in recognition of the variations experienced across the preceding MP and HP series where the contracted manufacturer directed the appliance build process. The process provides for standardisation across the series irrespective of manufacturers (provided capability has been demonstrated) and has resulted in reduced delivery timelines.”

FRSWA UP05HR Photo Gallery


WA Fire & Rescue – UP07 – Scania Urban Pumper

Service – Fire & Rescue Service of WA
Appliance type – Urban Pumper
Fleet number – UP07
Cab Chassis – Scania P310
Body Builder –
Registration – 1QBP394

This Urban Pumper replaced an Acco 2350 based Medium Pumper at Kalgoorlie-Boulder station.

DFES states: “UP Series appliance design is a continuous improvement upgrade to the Heavy Pump appliance series first commissioned in 2008.
The UP series development process incorporates the commissioning by Fleet and Equipment Services of FESA generated drawings and specifications, proto type manufacture under direction, and full scale manufacturing. This process was adapted in recognition of the variations experienced across the preceding MP and HP series where the contracted manufacturer directed the appliance build process. The process provides for standardisation across the series irrespective of manufacturers (provided capability has been demonstrated) and has resulted in reduced delivery timelines.”

Thanks to Matt for these photos.
IMG_4124


ACT Fire Rescue Aerial Appliances Australian Capital Territory Bronto Ladders/Platforms Scania Varley

ACTFR – Ladder Platform 31 – Scania/Bronto

Service – ACT Fire Rescue
Appliance type – Aerial or Ladder Platform
Fleet number –
Cab Chassis – Scania P380
Body Builder – Bronto Skylift boom, with Varley bodywork
Build Date – January 2009
Registration – 212465

Completed in 2009, this Bronto Ladder Platform replaced an aging 30 metre Bronto LP on an International ACCO cab chassis.

Bronto supplied the F44RLX ERX hydraulic ladder platform on Scania Cab Chassis with Varley completing the fitout prior to delivery to ACT Fire & Rescue. This LP is very similar to the new Ladder Platform delivered to FRNSW City of Sydney station in 2010 ()

A full gallery of this vehicle HERE

ACT Fire Brigade's 44 metre Bronto F44RLX-ERX Ladder Platform, or Scania P380 Cab Chassis. Bodywork by Liquip of Queensland

ACT Fire Brigade's 44 metre Bronto F44RLX-ERX Ladder Platform, or Scania P380 Cab Chassis. Bodywork by Liquip of Queensland

ACT Fire Brigade's 44 metre Bronto F44RLX-ERX Ladder Platform, or Scania P380 Cab Chassis. Bodywork by Liquip of Queensland


ACT Fire Rescue Appliances Australian Capital Territory Australian Fire Company Scania

ACTFR – Pumper 3 – Scania/AFC ’90s Build

Service – ACT Fire Rescue
Appliance type – Pumper
Fleet number –
Cab Chassis – Scania 93M 250
Body Builder – Australia Fire Co.
Registration – 207106

This Pumper was built by Australia Fire Co in SA in the early 1990s. It was replaced at Woden Valley Fire Station by a 2010 Varley Build Scania.

More photos of all around the vehicle in this album
http://photos.liveitseeit.com/FireGear/ACT-Fire-Service/ACTFR-Pumper-3/

Scania 93M Pumper at Philip Foire Station


Appliances MFB Melbourne Mills Tui Scania Victoria

MFB Melbourne – Car 012 – Scania Mk5 Pumper

Service – MFB Melbourne
Appliance Type – Mark 5 Pumper
Fleet Number – Car 12
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBB332
Commissioned – 2003

Car 12 is a ‘Mark 5 Pumper’ built by Mills Tui in 2003.
It’s been used as a training appliance, spent about 4 years at FS1 and is now in the reserve pool.

Full Gallery


Appliances MFB Melbourne Mills Tui Scania Victoria

MFB Melbourne – Car 003 – Scania Mk5 Pumper

Service – MFB Melbourne
Appliance Type – Mark 5 Pumper
Fleet Number – Car 3
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBB349
Commissioned – 2003

Car 3 is a ‘Mark 5 Pumper’ built by Mills Tui in 2002.
It’s spent most of its life as Pumper 12 and more recently a Reserve Pool appliance.

This vehicle is signed with a dedication to L Lavelle, Chief Fire Officer 1982-1988


Appliances MFB Melbourne Mills Tui Scania Victoria

MFB Melbourne – Car 015 – Scania Mk5 Pumper

Service – MFB Melbourne
Appliance Type – Mark 5 Pumper
Fleet Number – Car 15
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBM451
Commissioned – 2005

Car 15 is a ‘Mark 5 Pumper’ built by Mills Tui in 2004/05
It has served with the Training Department, 35 Windsor and is currently in the reserve pool.


Appliances MFB Melbourne Mills Tui Scania Victoria

MFB Melbourne – Car 380 – Scania Mk5 Teleboom

Service – MFB Melbourne
Appliance Type – Teleboom (Aerial Pumper)
Fleet Number – Car 380
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBM474
Commissioned – 2005

Car 380 is a Teleboom – referred to commonly as an Aerial Pumper in other jurisdictions. It was built by Mills Tui Australia and allocated to 7 Thomastown Fire Station.

The below images were captured at the MFB workshops in 2014

Gallery

Scania cab chassis with Telesqurt boom


Appliances MFB Melbourne Mills Tui Scania Victoria

MFB Melbourne – Car 037 – Scania Mk5 Pumper grows a ‘mo’ for Movember!

Service – MFB Melbourne
Appliance Type – Pumper
Fleet Number – Car 037
Cab Chassis – Scania P310
Body Builder – Mills Tui
Registration – MCI851
Commissioned – 2009

Car 37 is a Mills Tui built Mark 5 Pumper. It’s been assigned to FS 2 West Melbourne since commissioning in 2009.

Photographed here in 2014, it was participating in the Men’s health charity organisation and event ‘Movember’. Quite the dapper Mo.

Full Gallery


ACT Fire Rescue Appliances Australian Capital Territory Scania Varley

ACTFR – Pumper 3 – Scania/Varley 2010 Build

Service – ACT Fire Rescue
Appliance type – Pumper
Fleet number –
Cab Chassis – Scania P310
Body Builder – Varley Engineering
Registration – 213895

This Pumper was built by Varley Engineering in NSW in 2010 and delivered new to Woden Valley Fire Station. It replaces a Scania 93M Pumper

A dedication on the vehicle to fallen firefighter David Balfour reads:

SFQ David Balfour
Killed in the line of duty 17.02.2009
It’s just what we do

More photos of all around the vehicle in this album