Tag Archives: Aerial

ACT Fire Rescue Aerial Appliances Australian Capital Territory Bronto Ladders/Platforms Scania Varley

ACTFR – Ladder Platform 31 – Scania/Bronto

Service – ACT Fire Rescue
Appliance type – Aerial or Ladder Platform
Fleet number –
Cab Chassis – Scania P380
Body Builder – Bronto Skylift boom, with Varley bodywork
Build Date – January 2009
Registration – 212465

Completed in 2009, this Bronto Ladder Platform replaced an aging 30 metre Bronto LP on an International ACCO cab chassis.

Bronto supplied the F44RLX ERX hydraulic ladder platform on Scania Cab Chassis with Varley completing the fitout prior to delivery to ACT Fire & Rescue. This LP is very similar to the new Ladder Platform delivered to FRNSW City of Sydney station in 2010 ()

A full gallery of this vehicle HERE

ACT Fire Brigade's 44 metre Bronto F44RLX-ERX Ladder Platform, or Scania P380 Cab Chassis. Bodywork by Liquip of Queensland

ACT Fire Brigade's 44 metre Bronto F44RLX-ERX Ladder Platform, or Scania P380 Cab Chassis. Bodywork by Liquip of Queensland

ACT Fire Brigade's 44 metre Bronto F44RLX-ERX Ladder Platform, or Scania P380 Cab Chassis. Bodywork by Liquip of Queensland


Appliances MFB Melbourne Mills Tui Scania Victoria

MFB Melbourne – Car 380 – Scania Mk5 Teleboom

Service – MFB Melbourne
Appliance Type – Teleboom (Aerial Pumper)
Fleet Number – Car 380
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBM474
Commissioned – 2005

Car 380 is a Teleboom – referred to commonly as an Aerial Pumper in other jurisdictions. It was built by Mills Tui Australia and allocated to 7 Thomastown Fire Station.

The below images were captured at the MFB workshops in 2014

Gallery

Scania cab chassis with Telesqurt boom


Alexander Perrie Appliances Fire & Rescue NSW New South Wales Scania

Fire & Rescue NSW – ME704 – Scania Aerial Pumper (2012)

Service – NSW Fire & Rescue
Appliance type – Aerial Pumper
Fleet number – ME704
Cab Chassis – Scania P340
Body Builder – Alexander Perrie (Telesqurt boom)
Registration – BQ89CT

This aerial pumper is one of a new build by Alexander Perrie Sydney built in 2012. The aerial is an american built Telesqurt boom with AP completing the bodywork. Delivered new to 47 Revesby, replacing an older Mills Tui built Aerial Pumper.

Full Gallery

Fire & Rescue NSW Aerial Pumper from 47 Revesby station on display at NSW Police Air Wing Open Day, November 2012


Appliances Bronto Ladders/Platforms MFB Melbourne Scania SEM (Skilled) Victoria

MFB Melbourne – Car 171 – Scania Ladder Platform (Bronto 27m)

Service – MFB Melbourne
Appliance Type – Ladder Platform
Fleet Number – Car 171
Cab Chassis – Scania 94G 300
Body Builder – Skilled/SEM
Registration – MAR032
Commissioned – 2002

Car 171 has served most of its life at 35 Windsor. It is commonly referred to as a ‘Baby Bronto’ due to it’s smaller size compared to other Ladder Platforms – it is based on a Scania Cab Chassis with only a single rear axle and a 27M Bronto Skylift F27RLH boom.

This vehicle was seen in 2013 at Alexander Perrie in Sydney, where it’s believed to have undergone the usual midlife service and inspection for the aerial components.

Full Gallery


WA Fire & Rescue – CLP2 – Scania – Bronto Ladder Platform

Service – Fire & Rescue Service of WA
Appliance type – Combination Ladder Platform
Fleet number – CLP2
Cab Chassis – Scania P124G-360
Body Builder –
Registration – 1AZX-392

Fitted with a Bronto Skylift F32HDT-ER ladder platform.
Has served at Fremantle since new. In late 2013 it received a refurbishment and has new brighter striping.

MORE PHOTOS


WA Fire & Rescue – CLP1 – Scania / Bronto Skylift 33m

Service – Fire & Rescue Service of WA
Appliance type – Combination Ladder Platform
Fleet number – CLP1
Cab Chassis – Scania P113H-360
Body Builder – Australian Fire Co / Bronto Skylift
Registration – 8OZ812

Served at Perth Fire Station. Replaced in 2013 by CLP 3
Bronto Skylift 33-2TI model, 33m Ladder Platform

MORE PHOTOS


WA Fire & Rescue – TTL3 – Scania – Magirus Ladders

Service – Fire & Rescue Service of WA
Appliance type – Turntable Ladders
Fleet number – TTL3
Cab Chassis – Scania P93M-250
Body Builder – Metz Ladders
Registration – 9DR868

TTL3 serves as the spare aerial appliance in WA, replacing the Ladder Platform at Perth or Fremantle fire stations as necessary.

MORE PHOTOS

WA Fire & Rescue Spare Ladders.This appliance is the spare aerial for WA Fire & Rescue, replacing the Ladder Platforms at Perth or Fremantle when needed


Appliances Fire & Rescue NSW Mills Tui New South Wales Scania

Fire & Rescue NSW – ME507 – Scania – Aerial Pumper

Service – NSW Fire & Rescue
Appliance type – Aerial Pumper
Fleet number – ME507
Cab Chassis – Scania 94G 310
Body Builder – Mills Tui
Registration – FBY507 and BD97AQ

In service at 47 Revesby as AP47. Refurbishment including signage and striping upgrade has been completed.

Full Gallery


Alexander Perrie Appliances Bronto Ladders/Platforms Fire & Rescue NSW New South Wales Scania

Fire & Rescue NSW – ME208 – Scania – Bronto Ladder Platform

Service – NSW Fire & Rescue
Appliance Type – Ladder Platform
Fleet number – ME 208
Cab Chassis – Scania
Body Builder – Alexander Perrie / Bronto Skylift F27HDT
Registration – FBY208

In service at Crows Nest – LP36

Full Gallery


Alexander Perrie Appliances Bronto Ladders/Platforms Fire & Rescue NSW New South Wales Scania

Fire & Rescue NSW – ME207 – Scania – Bronto Ladder Platform

Service – NSW Fire & Rescue
Appliance type – Ladder Platform
Fleet number – ME207
Cab Chassis – Scania 94D 300
Body Builder – Alexander Perrie / Bronto Skylift
Registration – FBY207

Served at Kogarah as LP21

Full Gallery