Category Archives: Australian Fire Company

ACT Fire Rescue Appliances Australian Capital Territory Australian Fire Company Scania

ACTFR – Pumper 3 – Scania/AFC ’90s Build

Service – ACT Fire Rescue
Appliance type – Pumper
Fleet number –
Cab Chassis – Scania 93M 250
Body Builder – Australia Fire Co.
Registration – 207106

This Pumper was built by Australia Fire Co in SA in the early 1990s. It was replaced at Woden Valley Fire Station by a 2010 Varley Build Scania.

More photos of all around the vehicle in this album
http://photos.liveitseeit.com/FireGear/ACT-Fire-Service/ACTFR-Pumper-3/

Scania 93M Pumper at Philip Foire Station


Appliances Australian Fire Company Fire & Rescue NSW New South Wales Scania

Fire & Rescue NSW – ME340 – Scania – Pumper

Service – NSW Fire & Rescue
Appliance type – Pumper
Fleet number – ME340
Cab Chassis – Scania 94D 310
Body Builder – Australian Fire Co
Registration – FBY340

Served at 19 Silverwater

Full Gallery

Pump 19 Silverwater at a Large Structure Fire in Silverwater


Appliances Australian Fire Company MFB Melbourne Scania Victoria

FRV – Car 391 – Scania Ultra-Large Pumper

Service – MFB Melbourne
Appliance Type – Ultra Large Pumper
Fleet Number – Car 391
Cab Chassis – Scania P113M 310
Body Builder – Australian Fire Co.
Registration – MAE491
Commissioned – 1995

This is one of only a few ULPs in the MFB. It has served at 42 Newport and 1 Eastern Hill Fire Stations.

Full Gallery


Appliances Australian Fire Company Fire & Rescue NSW New South Wales Scania

Fire & Rescue NSW – ME345 – Scania 94D – Pumper

Service – NSW Fire & Rescue
Appliance type – Pumper
Fleet number – ME345
Cab Chassis – Scania 94D 310
Body Builder –
Registration – FBY345

Served at Manly as P24

Full Gallery

Pump 24 ManlyJune 2008


WA Fire & Rescue – CLP1 – Scania / Bronto Skylift 33m

Service – Fire & Rescue Service of WA
Appliance type – Combination Ladder Platform
Fleet number – CLP1
Cab Chassis – Scania P113H-360
Body Builder – Australian Fire Co / Bronto Skylift
Registration – 8OZ812

Served at Perth Fire Station. Replaced in 2013 by CLP 3
Bronto Skylift 33-2TI model, 33m Ladder Platform

MORE PHOTOS


Appliances Australian Fire Company Fire & Rescue NSW New South Wales Scania

Fire & Rescue NSW – ME341 – Scania 94D – Pumper

Service – NSW Fire & Rescue
Appliance type – Pumper
Fleet number – ME341
Cab Chassis – Scania 94D 310
Body Builder – Australian Fire Company
Registration – FBY341

Served at Dee Why as P69, then reassigned to 76 Bondi after a refurbishment including the newer signage and striping.

Full Gallery


Appliances Australian Fire Company Fire & Rescue NSW New South Wales Scania

Fire & Rescue NSW – ME337 – Scania 94D – Pumper (CAFS Prototype)

Service – NSW Fire & Rescue
Appliance type – Pumper
Fleet number – ME337
Cab Chassis – Scania 94D 310
Body Builder – Australian Fire Company
Registration – FBY337

Served at Glebe as Pumper 18. After being replaced by a new Scania Pumper, this appliance was retro-fitted with a CAFS (Compressed air foam system) utillity and trialled at a number of stations including 64 Lakemba and 46 Sutherland.

At last check it was assigned to 31 Busby

Full Gallery

FRNSW CAFS Prototype PumperFRNSW CAFS Prototype Pumper. The former Stn18 Glebe Pumper had Compressed Air Foam System added as a trial. The system produces a very good foam that is effective in a variety of situations, particularly with limited water use.

Open Day April 2007


Appliances Australian Fire Company Fire & Rescue NSW Pumper Scania

Fire & Rescue NSW – ME246 – Scania 94D – Pumper

Service – NSW Fire & Rescue
Appliance type – Pumper
Fleet number – ME246
Cab Chassis – Scania 94D 310
Body Builder – Australian Fire Company
Registration – BC70LE

Served at St Andrews as P92

Full Gallery

NSWFB P92 St Andrews


Appliances Australian Fire Company Fire & Rescue NSW Pumper Scania

Fire & Rescue NSW – ME347 – Scania 94D – Pumper

Service  -NSW Fire & Rescue
Appliance Type – Pumper
Fleet number – ME 347
Cab Chassis – Scania 94D 310
Body Builder –
Registration – FBY347

Served at Botany

Full Gallery

NSW Fire Brigades responded a 5th alarm to this scrub fire in Malabar, near the Long Bay prison along the Sydney coast.


Appliances Australian Fire Company Fire & Rescue WA Heavy Pumper Pumper Scania

WA Fire & Rescue – HP10 – Scania – Heavy Pumper

Service – Fire & Rescue Service of WA
Appliance type – Heavy Pumper
Fleet number – HP10
Cab Chassis – Scania P93M 250
Body Builder – Australian Fire Company
Registration – 8HW829

Served as a spare appliance. Now retired from service. After initially being decommissioned this pumper was retrofitted with additional Hazmat capabilities to be used at a large scale security operation in Perth. It has now been sold and is part of a private collection.

MORE PHOTOS