Service – MFB Melbourne
Appliance Type – Mark 5 Pumper
Fleet Number – Car 018
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBM467
Commissioned – 2003
Car 18 is a ‘Mark 5 Pumper’ built by Mills Tui and commissioned in 2005.
It’s part of the MFB reserve pool.
Service – MFB Melbourne
Appliance Type – Mark 5 Pumper
Fleet Number – Car 005
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBB329
Commissioned – 2003
Car 8 is a ‘Mark 5 Pumper’ built by Mills Tui in 2003.
It’s part of the MFB reserve pool.
Service – MFB Melbourne
Appliance Type – Mark 5 Pumper
Fleet Number – Car 004
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBB328
Commissioned – 2003
Car 4 is a ‘Mark 5 Pumper’ built by Mills Tui in 2003.
It’s part of the MFB reserve pool.
Car 191 is one of a series of 6 new heavy rescues built on a Scania Dual Cab Chassis. Prior rescues were based on single cab ACCO models.
These rescues are built by Bell Engineering and calls Fire Station 3 Carlton home.
Service – Fire Rescue Victoria
Appliance Type – Heavy Rescue
Fleet Number – Car 191
Cab Chassis – Scania P320
Body Builder – Bell Engineering
Registration – MDF563
Commissioned – 2020
Car 192 is one of a series of 6 new heavy rescues built on a Scania Dual Cab Chassis. Prior rescues were based on single cab ACCO models.
These rescues are built by Bell Engineering and calls Fire Station 7 Thomastown home.
Service – Fire Rescue Victoria
Appliance Type – Heavy Rescue
Fleet Number – Car 192
Cab Chassis – Scania P320
Body Builder – Bell Engineering
Registration – MDF564
Commissioned – 2020
Car 193 is one of a series of 6 new heavy rescues built on a Scania Dual Cab Chassis. Prior rescues were based on single cab ACCO models.
These rescues are built by Bell Engineering and calls Fire Station 25 Oakleigh its home.
Service – Fire Rescue Victoria
Appliance Type – Heavy Rescue
Fleet Number – Car 193
Cab Chassis – Scania P320
Body Builder – Bell Engineering
Registration – MDF565
Commissioned – 2020
Service – MFB Melbourne
Appliance Type – Pumper
Fleet Number – Car 002
Cab Chassis – Scania 94D 310
Body Builder – Mills Tui
Registration – MBB327
Commissioned – 2003
Car 002 is a ‘Mark 5 Pumper’ and was the first built by Mills Tui in 2003. Photographed below in NSW, when it was part of the contingent assisting with the devastating October 2013 bushfires around Sydney. It’s part of the MFB reserve pool.
In MFB tradition, this appliance shows a dedication to an MFB officer, with Car002 dedicated to N E Van Every, Chief Fire Officer 1974 – 1979
Service – Fire Rescue Victoria (formerly MFB Melbourne)
Appliance Type – Mark 5 Pumper Tanker
Fleet Number – Car 120
Cab Chassis – Scania P370
Body Builder – Fraser NZ
Registration – MCS776
Commissioned – 2018
Built by Fraser NZ and commissioned in 2018, Car 120 calls 19 North Balwyn station home.
The current West Melbourne Fire Station in Batman Street opened in August 1964, replacing the 1919 station in William Street.
The Station is located within Central District (based at FS1 Eastern Hill) and operates 2 Pumpers.
At last check, pumpers assigned to FS 2 were:
MFB Car 63, a Mark 5 Scania
MFB Car 37, a Mark 5 Scania – seen in this post sporting a ‘Mo’ for movember: MFB Car 037 at FS2
Service – MFB Melbourne
Appliance Type – Mark 5 Pumper
Fleet Number – Car 12
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBB332
Commissioned – 2003
Car 12 is a ‘Mark 5 Pumper’ built by Mills Tui in 2003.
It’s been used as a training appliance, spent about 4 years at FS1 and is now in the reserve pool.
RSS - Posts
Home