Category Archives: Victoria

Fire Station MFB Melbourne Victoria

MFB Melbourne – FS2 West Melbourne

The current West Melbourne Fire Station in Batman Street opened in August 1964, replacing the 1919 station in William Street.

The Station is located within Central District (based at FS1 Eastern Hill) and operates 2 Pumpers.

At last check, pumpers assigned to FS 2 were:
MFB Car 63, a Mark 5 Scania
MFB Car 37, a Mark 5 Scania – seen in this post sporting a ‘Mo’ for movember: MFB Car 037 at FS2

Appliances MFB Melbourne Mills Tui Scania Victoria

MFB Melbourne – Car 012 – Scania Mk5 Pumper

Service – MFB Melbourne
Appliance Type – Mark 5 Pumper
Fleet Number – Car 12
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBB332
Commissioned – 2003

Car 12 is a ‘Mark 5 Pumper’ built by Mills Tui in 2003.
It’s been used as a training appliance, spent about 4 years at FS1 and is now in the reserve pool.

Full Gallery


Appliances MFB Melbourne Mills Tui Scania Victoria

MFB Melbourne – Car 003 – Scania Mk5 Pumper

Service – MFB Melbourne
Appliance Type – Mark 5 Pumper
Fleet Number – Car 3
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBB349
Commissioned – 2003

Car 3 is a ‘Mark 5 Pumper’ built by Mills Tui in 2002.
It’s spent most of its life as Pumper 12 and more recently a Reserve Pool appliance.

This vehicle is signed with a dedication to L Lavelle, Chief Fire Officer 1982-1988


Appliances MFB Melbourne Mills Tui Scania Victoria

MFB Melbourne – Car 015 – Scania Mk5 Pumper

Service – MFB Melbourne
Appliance Type – Mark 5 Pumper
Fleet Number – Car 15
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBM451
Commissioned – 2005

Car 15 is a ‘Mark 5 Pumper’ built by Mills Tui in 2004/05
It has served with the Training Department, 35 Windsor and is currently in the reserve pool.


Appliances MFB Melbourne Mills Tui Scania Victoria

MFB Melbourne – Car 380 – Scania Mk5 Teleboom

Service – MFB Melbourne
Appliance Type – Teleboom (Aerial Pumper)
Fleet Number – Car 380
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBM474
Commissioned – 2005

Car 380 is a Teleboom – referred to commonly as an Aerial Pumper in other jurisdictions. It was built by Mills Tui Australia and allocated to 7 Thomastown Fire Station.

The below images were captured at the MFB workshops in 2014

Gallery

Scania cab chassis with Telesqurt boom


Appliances MFB Melbourne Mills Tui Scania Victoria

MFB Melbourne – Car 037 – Scania Mk5 Pumper grows a ‘mo’ for Movember!

Service – MFB Melbourne
Appliance Type – Pumper
Fleet Number – Car 037
Cab Chassis – Scania P310
Body Builder – Mills Tui
Registration – MCI851
Commissioned – 2009

Car 37 is a Mills Tui built Mark 5 Pumper. It’s been assigned to FS 2 West Melbourne since commissioning in 2009.

Photographed here in 2014, it was participating in the Men’s health charity organisation and event ‘Movember’. Quite the dapper Mo.

Full Gallery


ACCO Appliances MFB Melbourne Victoria

MFB Melbourne – Car 165 – International ACCO POD Transporter

Service – MFB Melbourne
Appliance Type – POD Transporter
Fleet Number – Car 165
Cab Chassis – International ACCO 2350G
Body Builder –
Registration – MWU233
Commissioned – May 1996

Car165 was Commissioned in 1996 and served at 38 South Melbourne and 47 Footscray fire stations. It was disposed of in 2011 and is has been seen in commercial operation.

Full Gallery


Appliances MFB Melbourne Mills Tui Scania Victoria

MFB Melbourne – Car 008 – Scania Mk5 Pumper

Service – MFB Melbourne
Appliance Type – Mark 5 Pumper
Fleet Number – Car 8
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBB346
Commissioned – 2003

Car 8 is a ‘Mark 5 Pumper’ built by Mills Tui in 2003. Photographed below in NSW, when it was part of the contingent assisting with the devastating October 2013 bushfires around Sydney. It’s part of the MFB reserve pool.

Photo Gallery


Appliances CFA Victoria SEM (Skilled) Victoria

CFA – Melton Tanker (2005 Mack Prototype)

Service – CFA (Victoria)
Appliance Type – Tanker
Cab Chassis – Mack
Body Builder – SEM
Built – October 2005
Registration – MBR374

This tanker was constructed as a prototype, with another prototype on MAN cab chassis at the same time. It spent some time touring differenet areas for demonstration, before eventually being allocated to Melton Fire Brigade.

Firefighting features include a 4000 Litre tank, protection spray systems, plumbed monitor rises in crew deck area. The most unique feature is perhaps the rear crew door which gives direct access between the rear of the cab and crew deck area.

More photos available in this gallery:CFA Melton Brigade

CFA Melton Tanker. December 2008

CFA Melton Tanker. December 2008


Appliances CFA Victoria Scania SEM (Skilled) Victoria

CFA – Melton Heavy Rescue (2008 Scania)

Service – CFA (Victoria)
Appliance Type – Rescue
Cab Chassis – Scania P310
Body Builder – SEM
Registration – MCD662

This appliance was commissioned late in December 2008 at Melton Fire Brigade, replacing an Isuzu Rescue appliance which was due to be reallocated to Monbulk Fire Brigade. It was built by SEM Fire & Rescue

More photos including 360 degree view and locker shots available in this gallery:CFA Melton Brigade

CFA Melton Rescue. December 2008

CFA Melton Rescue. December 2008