Tag Archives: ACCO

WA Fire & Rescue – MP60 – Acco 2350 Medium Pumper

Service – Fire & Rescue Service of WA
Appliance type – Medium Pumper
Fleet number – MP60
Cab Chassis – International ACCO 2350
Body Builder – South West Fire Units
Registration – 1ALI099

This pumper was part of a build of 6 on ACCO 2350 cab chassis. Most were originally setup as a standard Medium Pumper and later modified to become a Medium Pumper Heavy Rescue for use at major regional stations. The addition of a bullbar and updated signage are key visual signs of the rebuild. This appliance appears to have the midlife rebuild complete without the upgrade to Heavy Rescue

By 2015, this appliance had been replaced at Karratha by a Scania

Photographed in 2013, thanks Matt
Dept Fire & Emergency Services - Karratha


WA Fire & Rescue – MP(HR)61 – Acco 2350 Medium Pumper Heavy Rescue

Service – Fire & Rescue Service of WA
Appliance type – Medium Pumper
Fleet number – MP61
Cab Chassis – International ACCO 2350
Body Builder – South West Fire Units
Registration – 1QAJ503

This pumper was part of a build of 6 on ACCO 2350 cab chassis. It was originally setup as a standard Medium Pumper and then after a midlife rebuild was modified to become a Medium Pumper Heavy Rescue for use at major regional stations. The addition of a bullbar and updated signage are key visual signs of the rebuild.

Photographed in 2004 at Daglish Fire Station – in MP configuration

Photographed at the training academy at Forrestfield in 2012

IMG_4562


ACCO Appliances MFB Melbourne Victoria

FRV – Car 165 – International ACCO POD Transporter

Service – MFB Melbourne
Appliance Type – POD Transporter
Fleet Number – Car 165
Cab Chassis – International ACCO 2350G
Body Builder –
Registration – MWU233
Commissioned – May 1996

Car165 was Commissioned in 1996 and served at 38 South Melbourne and 47 Footscray fire stations. It was disposed of in 2011 and is has been seen in commercial operation.

Full Gallery


WA Fire & Rescue – MP42 – ACCO Medium Pumper (single cab)

Service – Fire & Rescue Service of WA
Appliance type – Medium Pumper
Fleet number – MP42
Cab Chassis – International ACCO 1810C
Body Builder –
Registration – 6KP404

Served at Claremont

This was one of few single cab pumpers in the modern era used by WAFB/FRS. The appliance was used as a spare in later years as well as a training appliance at the academy. After completing service it was held by a private collector and later apparently released back to the museum.

MORE PHOTOS


ACCO Appliances MFB Melbourne Victoria

FRV – Car 167 – International ACCO POD Transporter

Service – MFB Melbourne
Appliance Type – POD Transporter
Fleet Number – Car 167
Cab Chassis – International ACCO 2350G
Body Builder –
Registration – MAS553
Commissioned – 2000
Decommissioned – 2011

Car167 was Commissioned in 2000 and spent most of its life at 10 Richmond Fire Station. It was disposed of in 2011 and is believed to be in private use now.

Full Gallery


ACCO Appliances MFB Melbourne Victoria

FRV – Car 301 – International ACCO Pumper

Service – MFB Melbourne
Appliance Type – Pumper
Fleet Number – Car 301
Cab Chassis – International ACCO 1950C
Body Builder –
Registration – MYR953
Commissioned – 1983 (Deommissioned 2003)

MFB Car 301 was last seen in private ownership after being decommissioned in 2003. While in service, it served at stations 25 and 34, before finishing in the reserve pool.


WA Bush Fire Service – Gosnells 7.2 (retired)

Service – Bush Fire Service of WA
Appliance type – 7.2 (Bulk Water Tanker)
Fleet number –
Cab Chassis – International ACCO 1850C
Body Builder –
Build Date:
Registration – 9FD632

Brigade: Gosnells
Council: Gosnells

This vehicle has now been replaced by a brand new tanker

Gosnells 7.2 TankerPhoto October 2004

Gosnells 7.2 TankerPhoto October 2004


WA Fire & Rescue – POD Carrier (PCAR1)

Service – Fire & Rescue Service of WA
Appliance type -POD Carrier/Transporter
Fleet number – PCAR1
Cab Chassis – International ACCO
Body Builder –
Registration – 1QAH538

This POD Carrier was first setup with a Hose Layer and Bulk Foam POD. It spent many years sitting dormant at Forrestfield training academy and O’Connor workshops before the POD program was finally activated and it was placed at Malaga Fire Station.

The POD (Platform on Demand) system allows specialist modules to be transported with the modules lifted on or off as needed. It’s a similar concept to a ‘Skip Bin’ that you may have used at your home. This allows multiple specialist resources to be established with fewer trucks needed to transport them, reducing the number of vehicles and crews required. Once a module is delivered, the carrier can continue on to deliver other modules if necessary. Modules can also be left insitu for long periods without the vehicle staying on site.

Modules currently include USAR and Decontamination

MORE PHOTOS


ACCO Appliances Fire & Rescue NSW Hazmat

Fire & Rescue NSW – ME381 – ACCO – Heavy Hazmat

Service  -NSW Fire & Rescue
Appliance Type – Heavy Hazmat
Fleet number – ME 381
Cab Chassis – International ACCO
Body Builder –
Registration – FBY381

Served at Newcastle

Full Gallery


ACCO Appliances Fire & Rescue NSW New South Wales Specialist Support

Fire & Rescue NSW – ME377 – ACCO – USAR/ POD Transporter

Service  -NSW Fire & Rescue
Appliance Type – Transporter (USAR)
Fleet number – ME 377
Cab Chassis – International ACCO 2350G
Body Builder –
Registration – FBY377

Served at Newcastle as USAR vehicle

Full Gallery