Tag Archives: Fire & Rescue

Appliances MFB Melbourne Mills Tui Scania Victoria

FRV – Car 003 – Scania Mk5 Pumper

Service – MFB Melbourne
Appliance Type – Mark 5 Pumper
Fleet Number – Car 3
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBB349
Commissioned – 2003

Car 3 is a ‘Mark 5 Pumper’ built by Mills Tui in 2002.
It’s spent most of its life as Pumper 12 and more recently a Reserve Pool appliance.

This vehicle is signed with a dedication to L Lavelle, Chief Fire Officer 1982-1988


Appliances MFB Melbourne Mills Tui Scania Victoria

FRV – Car 015 – Scania Mk5 Pumper

Service – MFB Melbourne
Appliance Type – Mark 5 Pumper
Fleet Number – Car 15
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBM451
Commissioned – 2005

Car 15 is a ‘Mark 5 Pumper’ built by Mills Tui in 2004/05
It has served with the Training Department, 35 Windsor and is currently in the reserve pool.


Appliances MFB Melbourne Mills Tui Scania Victoria

FRV – Car 380 – Scania Mk5 Teleboom

Service – MFB Melbourne
Appliance Type – Teleboom (Aerial Pumper)
Fleet Number – Car 380
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBM474
Commissioned – 2005

Car 380 is a Teleboom – referred to commonly as an Aerial Pumper in other jurisdictions. It was built by Mills Tui Australia and allocated to 7 Thomastown Fire Station.

The below images were captured at the MFB workshops in 2014

Gallery

Scania cab chassis with Telesqurt boom


Appliances MFB Melbourne Mills Tui Scania Victoria

FRV – Car 037 – Scania Mk5 Pumper grows a ‘mo’ for Movember!

Service – MFB Melbourne
Appliance Type – Pumper
Fleet Number – Car 037
Cab Chassis – Scania P310
Body Builder – Mills Tui
Registration – MCI851
Commissioned – 2009

Car 37 is a Mills Tui built Mark 5 Pumper. It’s been assigned to FS 2 West Melbourne since commissioning in 2009.

Photographed here in 2014, it was participating in the Men’s health charity organisation and event ‘Movember’. Quite the dapper Mo.

Full Gallery


Appliances Fire & Rescue NSW Isuzu New South Wales SEM (Skilled)

Fire & Rescue NSW – ME572 – Isuzu/SEM Pumper

Service – NSW Fire & Rescue
Appliance type – Pumper
Fleet number – ME572
Cab Chassis – Isuzu
Body Builder – SEM
Registration – FBY572

Served at 514 Tweed River/Banora Point

Gallery


ACT Fire Rescue Appliances Australian Capital Territory Scania Varley

ACTFR – Pumper 3 – Scania/Varley 2010 Build

Service – ACT Fire Rescue
Appliance type – Pumper
Fleet number –
Cab Chassis – Scania P310
Body Builder – Varley Engineering
Registration – 213895

This Pumper was built by Varley Engineering in NSW in 2010 and delivered new to Woden Valley Fire Station. It replaces a Scania 93M Pumper

A dedication on the vehicle to fallen firefighter David Balfour reads:

SFQ David Balfour
Killed in the line of duty 17.02.2009
It’s just what we do

More photos of all around the vehicle in this album


WA Fire & Rescue – UT79 – Hino 2.4 Urban Tanker

Service – Fire & Rescue Service of WA
Appliance type – Urban Tanker
Fleet number – UT79
Cab Chassis – Hino
Body Builder – South West Fire Units
Registration – 1QBE142

UT79 was the first of a new version of the Urban Tanker for Career stations, to replace the aging Medium Tanker builds. It was based on existing 2.4 and 3.4 designs with additional modifications in consultation with firefighters due to the unique role that these tankers perform. The metro career Urban Tankers are staffed by 2 firefighters and have a key role in attacking bush fires in the metro area working with Pumpers and Light Tankers. Features such as a rear deck with monitor mounts, pump controls and communications to the driver as well as a ‘dead reel’ enable the crew of 2 to work efficiently.

The photographs captured were taken during a familiarisation session with firefighters before the appliance was assigned to a station.

MORE PHOTOS


WA Fire & Rescue – UT09 – Isuzu 3.4 Urban Tanker

Service – Fire & Rescue Service of WA
Appliance type – 3.4 Urban Tanker
Fleet number – UT09
Cab Chassis – Isuzu FTS 750
Body Builder – MacDonald Johnston Engineering
Registration – 1QAM243

The Urban Tanker is designed to provide a rural fire fighting capacity along with basic urban/structural firefighting capability. The vehicle carries 3000L of water, Breathing Apparatus and associated firefighting equipment.

This vehicle was built by MacDonald Johnston Engineering and delivered new to Cue Fire Brigade in 2004.

PHOTO GALLERY

Cue FRS Urban TankerCue's new 3.4U Tanker on display prior to delivery - at the Easter Championships in Fremantle.Photo April 2004

Cue FRS Urban TankerCue's new 3.4U Tanker on display prior to delivery - at the Easter Championships in Fremantle.Photo April 2004


ACCO Appliances MFB Melbourne Victoria

FRV – Car 165 – International ACCO POD Transporter

Service – MFB Melbourne
Appliance Type – POD Transporter
Fleet Number – Car 165
Cab Chassis – International ACCO 2350G
Body Builder –
Registration – MWU233
Commissioned – May 1996

Car165 was Commissioned in 1996 and served at 38 South Melbourne and 47 Footscray fire stations. It was disposed of in 2011 and is has been seen in commercial operation.

Full Gallery


Appliances MFB Melbourne Mills Tui Scania Victoria

FRV – Car 008 – Scania Mk5 Pumper

Service – MFB Melbourne
Appliance Type – Mark 5 Pumper
Fleet Number – Car 8
Cab Chassis – Scania 94G 300
Body Builder – Mills Tui
Registration – MBB346
Commissioned – 2003

Car 8 is a ‘Mark 5 Pumper’ built by Mills Tui in 2003. Photographed below in NSW, when it was part of the contingent assisting with the devastating October 2013 bushfires around Sydney. It’s part of the MFB reserve pool.

Photo Gallery